You don’t have to be an artist to make your sign a work of art.
Marches are a regular part of my life these days, and every good protester needs a sign. I used to just grab a piece of cardboard from the recycling bin and throw some words on it. My signs were legible, and my message sincere, but my designs left a lot be desired.
With three protests in April, I needed to up my sign-making game. After all, if I care enough to march, I care enough to make a good sign. The problem? I don’t have much free time, I refuse to buy any new materials like stencils or paints, and I’m terrible at art.
So I had to figure out a way to make a decent sign in less than an hour, for less than a dollar, with zero artistic ability. I’m not saying my method—or my sign—is the best. But it is a cut above my recycled cardboard ones, and looks quite good for the amount of time/money/effort I put into it. Want to make one too?
Here’s what you’ll need:
Poster board (One sheet cut in half to make two signs)
An index card
A ruler or yardstick
Markers, pencil, and scissors
I had all these things on hand except for the poster board. That cost me 79 cents.
Here are some optional things:
Artwork printed off the internet
Here’s how to do it in ten easy steps:
1. Decide what your sign will say. Shorter is better! The experts say fewer than seven words is ideal. My sign for the tax march says “No one is above the law.” That’s a message I think we can all agree on!
2. Measure your space. Now that you know what you want to say, you know how many letters per line you’ll be writing. Be sure to count the space between words! In my case, I was doing two words per line, so my longest string was “is above.” I’d need eight spaces for that.
3. Do the math to figure out how big each letter should be. My poster board was 14 inches wide. Therefore, each letter could only be 1.5 inches wide. (8 x 1.5 = 12 inches, plus .25 inches between each letter for a total of 14 inches.)
4. Make a rectangular stencil out of your index card. I made mine 1.5 inches wide and 2.5 inches tall. That’s the orange rectangle in my photo.
5. Very lightly, in pencil, trace around the index card as many times as you have letters. For me, that was 6 boxes for line one, 8 boxes for line two, and 7 boxes for line three. Remember that the space between the words counts as a box! (Also: I discovered that with fewer letters on lines one and three, I could make those boxes slightly bigger. But let’s pretend for this tutorial that they were the same.)
6. Now you have neat little boxes to make your letters in. Every letter will be the same size and you won’t run out of room. A good artist would simply freehand the letters at this point, but I am not a good artist. I penciled in every letter. It didn’t take long and made me more confident with the markers. Make your letters really thick! Thin ones can’t be read from far away.
7. Color in the words with markers. This is always my favorite part. I love to color.
8. Erase the pencil lines. Also my favorite part.
9. How about some artwork? Here’s my big secret. I simply found an image I liked on the internet, printed it, cut it out and glued it to my sign with glue stick. Done! The sign is ready to be carried to the march. But what about that second piece of poster board?
10. If you want to, you can use the other piece of poster board to make a second sign. Tape the signs back to back, and put a yardstick (or a cardboard tube) in the middle for a handle. Your sign will be more visible if you carry it above your head.
Have a good march! Make new friends. Yell really loudly. Connect with important local organizations. Remember to stay hydrated and always clean up your trash. Peaceful assembly is your constitutional right and speaking truth to power is one of the very best things Americans can do.
Especially when our signs don’t suck.